Asbestos in window glazing is possible in Canadian homes built before 1990. Glazing is the putty or caulking that holds the glass in the frame. It’s low risk while it stays intact, but you should never scrape, sand or cut it. Get it lab tested first.
Key Takeaways
- Putty, caulking and sealants in homes built before 1990 may contain asbestos, and Health Canada names them as places it can turn up.
- You can’t spot asbestos by eye, because only a laboratory test can confirm it.
- Intact, sealed glazing is a much lower risk than glazing that’s being scraped, sanded, drilled or broken.
- Test before any repair or replacement, and hire a qualified specialist if asbestos is found.
- New windows use sealed glass units and gaskets, so replacing old windows can end the problem once the old glazing is removed safely.
What Is Window Glazing, and Can It Contain Asbestos?
Window glazing is the putty or caulking that seals glass into a frame. In older homes, that material can contain asbestos fibres. Health Canada says asbestos was mainly used in buildings before 1990, and it lists putty, caulking and sealants among the places it can hide.
Glazing sits around the edge of each pane, often on older wood windows. It goes on soft and hardens in place. In one lab-tested example of an old wood-framed window, the glazing came back with 2% chrysotile asbestos. That’s one case, not a rule, but it shows why testing matters.
The good news is that the rules have changed. Canada now prohibits the manufacture, import, sale and use of asbestos-containing products, under regulations introduced in 2018. So glazing on a new window won’t contain it. The question is only about what’s already in your walls.
From Our Showroom: Best Sellers in the GTA
Which Homes Are Most Likely to Have Asbestos Glazing?
Homes built before 1990 are the main concern. The risk looks highest for houses built from the 1950s to the 1970s, according to Green Stream Environmental. If your windows are original and your house is that old, treat the glazing as suspect until a lab says otherwise.
| Build period | What to assume |
| Before the 1950s | Test before any work |
| 1950s to 1970s | Highest concern, treat as suspect |
| 1980s to 1990 | Possible, test before any work |
| After 1990 | Less likely, test if unsure |
It’s worth checking if you own an older home in Toronto or elsewhere in the GTA. Windows fitted since 1990 are less likely to be a concern. Even so, old caulking around a replaced frame can be a separate question, so ask who did the work and what they used.
Windows and Doors near me
Is Asbestos in Window Glazing Dangerous?
It’s dangerous when fibres get into the air and you breathe them in. Intact, sealed glazing is a much lower risk. Drilling, sawing, sanding, scraping or breaking the material is what releases fibres. Those fibres can cause lung cancer, asbestosis and mesothelioma.
Age adds to the problem. Old putty dries out and can crumble, which makes it easier to disturb. Window removal is the riskiest moment, because the glass and putty get pulled apart. That’s why you shouldn’t start any window project in an older home without a test result in hand.
How to Tell If Your Window Glazing Has Asbestos
You can’t tell by looking. Asbestos looks like ordinary putty or caulking, so a lab has to confirm it. What you can do is spot the signs that mean you should test before anyone touches the windows.
| Sign | What it means |
| House built before 1990 | Possible asbestos, test first |
| Original wood windows, never re-glazed | Higher chance of old putty |
| Cracked or crumbling putty | Easier to release fibres, don’t touch |
| Glazing redone in past years | Material unknown, ask who did it |
| No paperwork on materials | Treat as unknown until tested |
Please don’t chip off a piece to send to a lab yourself. Taking a sample disturbs the material, which is the very thing you want to avoid. A professional collects it with the right controls.
How Do You Test Window Glazing for Asbestos?
Hire a qualified asbestos consultant or inspector to collect a small sample and send it to an accredited laboratory. Don’t take the sample yourself. The lab report says whether the glazing contains asbestos, so you can plan the work safely before any contractor starts.
Here’s the usual order of events:
- Leave the windows alone. Don’t scrape, sand or drill near the glazing while you wait.
- Book a qualified asbestos professional. Ask them to take the sample and send it to a lab.
- Read the lab report. It will say whether asbestos is present in the glazing.
- Share the result with every contractor who quotes. They need it to price and plan the job.
- Plan the work around the result. A negative test means normal removal. A positive test means a specialist comes first.
“Homeowners often ask us to start the job and sort the paperwork later. With older windows, we ask for the test result first. It protects the crew, your family and your timeline,” says a lead installation manager at TotalSeal.
What Do Ontario Rules Say About Asbestos Before Window Work?
Ontario’s asbestos regulation expects the owner to find out whether materials that will be disturbed contain asbestos before work starts. The owner then shares that report with the contractors bidding. If asbestos turns up unexpectedly, the contractor must stop and notify the Ministry.
The Ontario guide to the regulation says the report should state whether the material is asbestos-containing, whether it’s friable (crumbly) or not, and where it is. The owner doesn’t need a fresh examination if they already know the answer or treat the material as asbestos-containing.
These rules are written for construction projects. So ask any installer how they handle older homes before you sign anything. A good one will ask about your home’s age in the first call.
Should You Replace Windows With Asbestos Glazing?
Often yes, once the old glazing has been tested and handled by the right people. Replacement removes the material for good and swaps in sealed glass units. Leaving intact glazing alone is also an option, but any repair or renovation near it needs a plan.
If your windows are also draughty, foggy or hard to open, you’re likely facing common old windows issues as well. It helps to know how often windows should be replaced before you decide. Full window replacement also lets you pick ENERGY STAR™ certified windows, which can cut heat loss and draughts.
Pros of replacing:
- The old glazing is removed for good once it’s handled safely.
- Sealed glass units don’t rely on a putty line that ages and cracks.
- You can fix draughts and condensation at the same time.
- ENERGY STAR™ certified options are available for Ontario’s climate.
- Our windows warranty covers the new installation.
Cons of replacing:
- It costs more upfront than leaving intact glazing alone.
- A test, and possibly specialist removal, adds time and cost before the install.
“Old putty is a face seal that ages and cracks. A modern sealed unit holds the glass with gaskets and a warm-edge spacer, so there’s no putty line to maintain. That’s a big reason replacements outlast old glazing,” says a senior product engineer at TotalSeal.
What Not to Do If You Suspect Asbestos
Don’t try to deal with it yourself. Health Canada links the risk to disturbing materials, so the safest rule is to leave suspect glazing exactly as it is until you have a test result.
- Don’t scrape, sand, drill or cut near the glazing.
- Don’t break the glass out of the frame.
- Don’t let a contractor “just rip them out” without a test.
- Don’t collect chips or dust and bin them yourself.
- Don’t assume newer paint on top means the glazing underneath is safe.
Your Options at a Glance
Your choice depends on the test result and your plans. This table shows the usual paths for an older home.
| Option | Disturbs glazing? | Who does the work | Best when |
| Leave it and monitor | No | You, by looking only | Glazing is intact, no renovation planned |
| Test only | Sample taken | Asbestos professional | You want facts before deciding |
| Specialist removal, then new windows | Yes, controlled | Removal team, then installer | The test is positive |
| Replace after a negative test | Yes, normal | Installer | The lab finds no asbestos |
If you’re unsure, testing is the cheapest first step. It turns a worry into a plan, and it keeps you on the right side of the rules above.
How Much Does It Cost to Replace Windows With Asbestos Glazing?
There’s no single price. The total depends on how many windows you have, their type and size, the lab test, and whether a specialist has to remove the old glazing first. Testing and removal add to the normal replacement cost, so get both quoted before you commit.
You can get a ballpark for the window side with our online window cost estimator. Then add the test and any removal quotes on top. If you’re weighing the spend, our guide on whether replacement is worth it walks through the payback.
Frequently Asked Questions
Here are quick answers to the questions homeowners ask us most about old glazing.
Does Old Window Putty Contain Asbestos?
It can. Putty and caulking in homes built before 1990 may contain asbestos. You can’t tell by looking, so only a lab test can confirm it. Leave it undisturbed until you have a result.
When Was Asbestos Used in Window Glazing?
It turns up most in homes built from the 1950s to the 1970s, and the risk remains in houses built before the 1980s. Health Canada says asbestos was mainly used in buildings before 1990.
Can I Remove Asbestos Window Glazing Myself?
It’s not a good idea. Scraping, sanding or breaking the material releases fibres. Health Canada advises hiring a qualified asbestos removal specialist if testing finds asbestos in your home.
Is Intact Window Glazing With Asbestos Safe to Live With?
It’s a lower risk when it’s intact, sealed and undisturbed. The danger comes from airborne fibres. Check the glazing for cracks, and test it before any repair or renovation.
Do New Windows Contain Asbestos?
No. Canada prohibits the manufacture, import, sale and use of asbestos-containing products, under rules introduced in 2018. Our new windows use gaskets and sealed glass units, not putty.
Do I Need an Asbestos Test Before Replacing Windows?
If your home was built before 1990, yes, it’s the safest step. Health Canada advises testing before you renovate, and Ontario rules expect owners to check materials before work begins.
Ready to Plan Your Window Project?
If your home is older and you’re thinking about new windows, start with a test, then talk to us. We’ll plan the install around your result and give you a clear price. You can book a free in-home consultation with our certified installers whenever you’re ready, or read more about full window replacement first.